SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
1996 Ford Bronco
Home/ Registry/ Ford/ Bronco/ 1992–1996/ 1996 Bronco supermotors.net/registry/22641

1996 Ford Bronco

39 photos documented since 2010 1 years documented ♡ Follow this build

Photos

1996 Ford Bronco - My 1996 Bronco XLT 5.8L 1996 Ford Bronco - Old Blue (and White). 1996 Ford Bronco - The beginning of the timing cover repair job. 1996 Ford Bronco - You can see where the coolant was seeping at the block gasket. 1996 Ford Bronco - The cover finally removed after dealing with a seized pump bolt. 1996 Ford Bronco - Notice the drill bit marks along the bolt length. 1996 Ford Bronco - This was the tube I rigged to hold Kroil penetrant oil all day while the cover was still stuck in place. 1996 Ford Bronco - The selection of tiny bits I used with the Dremel to drill the corrosion out between the bolt and the cover. 1996 Ford Bronco - The cover hole wasn't touched and all the corrosion can now be cleaned perfectly. 1996 Ford Bronco - My timing chain still checks OK and the pan/block is very clean. No sludge that I could see anywhere. I could see bare metal in the pan bot… 1996 Ford Bronco - Pan bolted back into place 1996 Ford Bronco - New timing cover gasket with copper coat and the Fel-Pro silicon 1-piece pan gasket. 1996 Ford Bronco - Pan and timing cover back into perfect alignment 1996 Ford Bronco - This 1996 Ford Bronco features a two-tone blue and white paint scheme with chrome accents. 1996 Ford Bronco - This 1996 Ford Bronco is a two-tone blue and white SUV with a removable hardtop. 1996 Ford Bronco - Old Left, Improved New Right 1996 Ford Bronco - The sad attempt to braze a crack on stainless steel 1996 Ford Bronco - New air pipe has no bellows section 1996 Ford Bronco - Obvious differences in air pipe 1996 Ford Bronco - Part number decal on new air pipe 1996 Ford Bronco - PCV grommet in valve cover, under upper intake 1996 Ford Bronco - OEM PVC setup...works but was shot. 1996 Ford Bronco - OEM fitting broken, pieces recovered in valve cover 1996 Ford Bronco - 5/8" silicon hose and parts to create new setup 1996 Ford Bronco - Assembled PCV setup 1996 Ford Bronco - Setup installed prior to upper intake plenum. 1996 Ford Bronco - As seen on truck now. Note p-clamp hose support. 1996 Ford Bronco - Close-up view of various engine components, including hoses and a black filter housing. 1996 Ford Bronco - Close-up view of engine components, including belts and pulleys, with a visible date stamp. 1996 Ford Bronco - Close-up view of an alternator and a black hose, with a visible part number '15' stamped on the alternator housing. 1996 Ford Bronco - Close-up view of an engine bay, showing various hoses and mechanical parts. 1996 Ford Bronco - Close-up of a transmission hose with visible text, part of an engine compartment. 1996 Ford Bronco - Close-up of a transmission oil cooler hose and wiring harness, with visible part markings. 1996 Ford Bronco - A close-up view of a black hose with visible text indicating its specifications and manufacturer. 1996 Ford Bronco - A detailed view of an engine part, showing various connections and tubing. 1996 Ford Bronco - Close-up view of engine hoses and wiring, with a visible date stamp of 01/21/2001.
Browse all 39 photos

The peanut gallery

No comments yet — be the first to add to the record.

Spotted in the wild

Seen this vehicle at a show or on the trail? Add your shot — the owner approves it onto the record.