SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
1996 Ford Bronco “Rio”
Home/ Registry/ Ford/ Bronco/ 1992–1996/ “Rio” supermotors.net/registry/26682

“Rio”1996 Ford Bronco

59 photos documented since 2014 1 years documented ♡ Follow this build

The story

This truck was from georgia so the frame and body are very clean and i got it fairly cheap but there was no interior in the truck, the previous owner was going to make it a mud truck but decided the body was too good for that purpose. Right now i have the interior out of a 1989 eddie bauer bronco because it matched the tan dash. I will be on the hunt for a 92-96 tan interior. I have done a lot of work to the bronco since i bought it in spring 2014 and i will continue wrenching and wheeling as long as i have the time and money — thebroncofanatic

Photos

1996 Ford Bronco - When i first got her 1996 Ford Bronco - Late spring 2014 1996 Ford Bronco - A white Ford Bronco is parked on a green lawn with houses and trees in the background. 1996 Ford Bronco - This 1996 Ford Bronco is seen from the rear, parked on a grassy lawn with a spare tire on the tailgate. 1996 Ford Bronco - As she sits now after getting back from the wood county 4 wheelers club mud bog in bradner OH 1996 Ford Bronco - Soft top from bronco graveyard 1996 Ford Bronco - This white 1996 Ford Bronco has a black soft top and is covered in mud splatters. 1996 Ford Bronco - This white Ford truck is parked on a grassy lawn with trees in the background. 1996 Ford Bronco - Just dipped a toe in the mud 1996 Ford Bronco - Rough country single steering stabilizer Pre-assembled it. The 2 bolts in the upper left are for f2 and f350s also included are bigger u bo… 1996 Ford Bronco - Its best to attach the bracket up front and slide it back because of the inner fender being in front of the top bolt 1996 Ford Bronco - Slid the bracket to the correct locattion behind that metal stud 1996 Ford Bronco - Extended the shock absorber 4.5 inches and attached the tie rod bracket and u bolts 1996 Ford Bronco - Rotated the bracket into a location where it wouldnt bind and tightened evrything up 1996 Ford Bronco - Kept the bolts parallel to the ground while i was tightening them 1996 Ford Bronco - Just about finished 1996 Ford Bronco - Done Added the included sticker for the cool factor As for functionality it works great, takes all the play out of the steering wheel and g… 1996 Ford Bronco - C150 centurion i found on a snowmobile trip in Gaylord, Michigan the first one i have ever seen in real life so i went up to the house it w… 1996 Ford Bronco - A Ford truck is parked in a snowy area, with snow covering most of its body. 1996 Ford Bronco - A white Ford truck, likely a 1992 model, is partially covered in snow with a camper shell on the bed. 1996 Ford Bronco - A white 1996 Ford Bronco with a camper shell sits covered in snow, displaying its rear and license plate. 1996 Ford Bronco - 1996 Ford Bronco seen parked in a snowy area next to another truck. 1996 Ford Bronco - Very clean, for a michigan truck you cant see it but theres some rust on the bottom of the rockers but still a great truck 1996 Ford Bronco - Cold air intake kit i bought on ebay. Search 5.8 intake. This is a cheap kit from china but i diddnt want to pay 200 for a k&n. Anyway here… 1996 Ford Bronco - Removed stock intake Note: broken chunk of the snorkel from PO 1996 Ford Bronco - Got the maf attached to the adaptor and the air intake temp sensor locked into the bung 1996 Ford Bronco - All pieces assembled and adjusting to fit 1996 Ford Bronco - Universal bracket in the kit. I used the existing air box screw and bent a 90 degree in the bracket to fit 1996 Ford Bronco - Good shot of the air temp sensor 1996 Ford Bronco - More pics 1996 Ford Bronco - Close-up view of an engine bay, highlighting a newly installed cold air intake system. 1996 Ford Bronco - End result the intake works well. There is better throttle response, slightly improved mpg, a more throaty sound out of the engine and the… 1996 Ford Bronco - Guide to fuel pump replacement I made an access panel in the floor its about 8x11" I measured and cut it out based on steve83 's specs… 1996 Ford Bronco 1996 Ford Bronco - The cut panel Im going to make it hinged and reseal it to the floor 1996 Ford Bronco - Gas tank ring removed. It is important to keep the area around the pump clean and free of dirt 1996 Ford Bronco - Quick disconnect tool I used about $5 at an autoparts store 1996 Ford Bronco - Got the pump and sender out and as you can tell the pump has been replaced before because of the butt connectors on the red and black wires… 1996 Ford Bronco 1996 Ford Bronco - There are 3 1/4 screws that holt the pump to the sender and float assembly that need to be removed

The peanut gallery

No comments yet — be the first to add to the record.

Spotted in the wild

Seen this vehicle at a show or on the trail? Add your shot — the owner approves it onto the record.