SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
1988 Ford Bronco “OJ Mobile”
Home/ Registry/ Ford/ Bronco/ 1987–1991/ “OJ Mobile” supermotors.net/registry/24918

“OJ Mobile”1988 Ford Bronco

284 photos documented since 2012 9 years documented ♡ Follow this build

The story

Originally my parrents truck they bought new. gave to me when i got my liceanse. quickly turned into a mudtruck. Got the name "OJ Mobile" after my speedy offroading style, many runins with cops, and it being similar to the white bronco OJ Simpson used. everything has pretty much been stripped out and make into a mudtruck and go through deep water. — Kingfish999

Day one vs. today

Drag to compare 2012 against 2021.

1988 Ford Bronco in 2021
1988 Ford Bronco in 2012
2012 2021

Photo history

284 photos across 9 years — drag the dot to travel through this vehicle’s life. Captions are the owner’s; where there isn’t one, the AI caption fills in.

2012

2012

58 photos added — showing 8

1988 Ford Bronco - First time mudding. defiantly got me hooked. no i did not get stuck in this either At a place we use to call the "44 hole". It no… 1988 Ford Bronco - 1988 Ford Bronco navigating a challenging muddy terrain. 1988 Ford Bronco - A white 1988 Ford Bronco is shown struggling through a muddy off-road trail, kicking up a large spray. 1988 Ford Bronco - A white SUV navigates through a muddy terrain, with trees visible in the background. 1988 Ford Bronco - A white 1988 Ford Bronco navigates a muddy off-road trail, kicking up dirt and water. 1988 Ford Bronco - A tan 1987 Ford Bronco is parked on a dirt road with trees in the background. 1988 Ford Bronco - first time stuck..... nobody to pull us out 1988 Ford Bronco - A dusty Ford Bronco navigates a muddy trail, kicking up water.

2013

40 photos added — showing 8

1988 Ford Bronco - Redneck Yatch Club - Driving like a boss 1988 Ford Bronco - Redneck Yatch Club - Driving like a boss 1988 Ford Bronco - Redneck Yatch Club - Driving like a boss 1988 Ford Bronco - Redneck Yatch Club - Driving like a boss 1988 Ford Bronco - My friends trailering it to Redneck Yatch Club. Its strapped down alot better than it appears 1988 Ford Bronco - Redneck Yatch Club - Doing reverse blasts through holes over hood deep without the topper on in winter. Leaves everyone soaking wet and col… 1988 Ford Bronco - Redneck Yacht Club - Driving like a boss through some nasty rutts. no big deal. only in 2wd 1988 Ford Bronco - Redneck Yacht Club - What happens to the hood when you drive 30mph into a deep hole with water a foot deeper than the hood, have a huge wav…

2014

18 photos added — showing 8

1988 Ford Bronco - Project Possessed is what is basically swapping everything from my old 96 Bronco to this 88 Bronco. Reason im calling it that is to me im t… 1988 Ford Bronco - DAY 1: I just finished scrapping my old 96 yesterday. I have parts laying EVERYWHERE and they need to be used ASAP. The rear axle was the b… 1988 Ford Bronco - DAY 1: I just finished scrapping my old 96 yesterday. I have parts laying EVERYWHERE and they need to be used ASAP. The rear axle was the b… 1988 Ford Bronco - DAY 2: Pulled the old seized motor out. Since the motor was seized, I couldn't get to the torque converter nuts and had to pull the torque… 1988 Ford Bronco - DAY 2: Pulled the old seized motor out. Since the motor was seized, I couldn't get to the torque converter nuts and had to pull the torque… 1988 Ford Bronco - DAY 3: pulled the tranny and transfer case. tranny needs a rebuild as the clutches burned up and it wont shift into 3rd. will probably sell… 1988 Ford Bronco - DAY 3: pulled the tranny and transfer case. tranny needs a rebuild as the clutches burned up and it wont shift into 3rd. will probably sell… 1988 Ford Bronco - DAY 3: pulled the tranny and transfer case. tranny needs a rebuild as the clutches burned up and it wont shift into 3rd. will probably sell…

2016

3 photos added

1988 Ford Bronco - truck has been sitting back here for over a year now. tires no longer hold air and i wanted to steal the rims from it to put on my F250. i… 1988 Ford Bronco - 305 75 16 BFG Mud tires. alot of tread but old and dryrotted 1988 Ford Bronco - rims from my F250 and better shows. they may be dryrotted but at least i can roll the truck around and work on it. old tires didnt hold air…

2017

8 photos added

1988 Ford Bronco - these are the only markings on the heads. seems to be the date of manufacture and another code of sorts. 20170421 B2 55 20170422 A8 25 im a… 1988 Ford Bronco - exhaust port castings 1988 Ford Bronco - intake port castings 1988 Ford Bronco - These are a set of unbranded aluminum bare cylinder heads i got on ebay. They were said to have part number AP-330803-8567 tho its not mark… 1988 Ford Bronco - so after 2.5 years of hiatus from Project Possessed which never got done, i figured it finally time to get this ol truck back in business.… 1988 Ford Bronco - i recently made a set of 37 inch military wheels re-centered for the correct offset. they are Goodyear MT and have the runflats replaced wi… 1988 Ford Bronco - plenty of clearance in rear with the 37" wheels 1988 Ford Bronco - there is no weight in the front due to the engine and tranny being out so once there in, the front will be quite lower due to the soft Deav…

2018

33 photos added — showing 8

1988 Ford Bronco - engine block is a standard 351w non-roller i bought from a friend. it was previously rebuilt by a company in the past at some point but the… 1988 Ford Bronco - the camshaft is a Comp Cams 35-421-8 small base retrofit roller cam. i did not want to buy a set of linkbar lifters and i had a set of stoc… 1988 Ford Bronco - Close-up view of a V8 engine block with internal components exposed, resting on an engine stand in a workshop. 1988 Ford Bronco - Dana 50 third member regeared for 5.13 ratio and Grizzly locker installed 1988 Ford Bronco - dropping the engine in. had to pull the truck from its resting spot onto cement then take the front tires off to get it to go over.. once i… 1988 Ford Bronco - engine dropped in. ready to be assembled. 1988 Ford Bronco - because the engine went in soo well, we decided we should go ahead and get the tranny and t-case in. using my neighbors motorcycle jack i w… 1988 Ford Bronco

2019

46 photos added — showing 8

1988 Ford Bronco - the tailgate was completly falling apart at the seams and rusting baddly due to the window opening. the window linkage was completely ruste… 1988 Ford Bronco - inside lip of the diamond plate. its recessed at the handle so you wont get cut opening the tailage 1988 Ford Bronco - because the truck is using a 92-96 harness, there are unused running lights used in the 87-91. i used these to wire up LED pods for extra l… 1988 Ford Bronco - just like my 96, i am going to bedline the floor and put vinyl flooring over it. i did not use the sound insulation. i also had new seats t… 1988 Ford Bronco - vinyl flooring put in. same kit i used for the 96. its made by Auto Custom Carpet and i got it from Automotive Interiors for cheaper than a… 1988 Ford Bronco - vinyl flooring passenger side view 1988 Ford Bronco - new seats from a ~2000s Chevy (probably Silverado). looked through the junkyard for the best pair of seats i could that were not cloth. the… 1988 Ford Bronco - because the seats came from a chevy with a pretty flat floor, but the floor of a ford has the seating area raised up, i had to fabriate a l…

2020

32 photos added — showing 8

1988 Ford Bronco - due to the pipe bumper i have been kinda putting off doing a winch. decided it was finally time to add one. 1988 Ford Bronco - this is a Badlands universal winch plate form Harbor Freight. i cut about 6 inches from each side so it will fit in my brushguard 1988 Ford Bronco - i decided that those pieces i cut off would be great for mounting the plate to the round bumper. i welded them everywhere i could including… 1988 Ford Bronco - because the winch mounts from 4 bolts at the bottom, i need to have the winch forward of the bumper so i can actually bolt the winch i used… 1988 Ford Bronco - for more support i welded a brace to the standoff. 1988 Ford Bronco - winch plate is bolted on with (6) 1/2 inch grade 8 bolts. it should be plenty strong i cut the sharp corners off the winch plate to prevent… 1988 Ford Bronco - as i do with all my trucks, i disassembled the relay box that normally mounts on top of the winch. i mounted the relay on the core support.… 1988 Ford Bronco - fully assembled

2021

25 photos added — showing 8

1988 Ford Bronco 1988 Ford Bronco 1988 Ford Bronco 1988 Ford Bronco 1988 Ford Bronco 1988 Ford Bronco 1988 Ford Bronco 1988 Ford Bronco
Browse all 284 photos Album view

The peanut gallery

No comments yet — be the first to add to the record.

Spotted in the wild

Seen this vehicle at a show or on the trail? Add your shot — the owner approves it onto the record.