SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”

Join

1995 Ford Bronco

Home/ Registry/ Ford/ Bronco/ 1992–1996/ 1995 Bronco supermotors.net/registry/24838

1995 Ford Bronco

414 photos documented since 2012 1 years documented ♡ Follow this build

Photos

1995 Ford Bronco - A local shop called T and J Outfitters did my bed lining. It goes from the tailgate to fire wall, all for $500! I've been very pleased with…

1995 Ford Bronco - Me and a friend of mine pulling out my leaky 302 in preparion to put the 351w in.

1995 Ford Bronco - Looks to good to put in a DD/ weekend wheeler!

1995 Ford Bronco - Almost ready to start hooking everything back up.

1995 Ford Bronco - Operation: Eight Lug - completed 33X12.50R 16.5 Radial TSL's

1995 Ford Bronco - Tach install, easiest mod I've ever done

1995 Ford Bronco - Pulled in the driveway to wash her and found this! It broke when i hit a bump at the end of my driveway and i hadnt even realized it.

1995 Ford Bronco - 4" RC lift installed w/ eight lug conversion

1995 Ford Bronco - My 3 trumpet train horn installed

1995 Ford Bronco - 6" lift installed w/ the 33's, soooo goofy

1995 Ford Bronco - Finally some big meats!

1995 Ford Bronco - My girls

1995 Ford Bronco - What I'm starting with

1995 Ford Bronco - Crossmember metal. 1. 2x4 1/4" thick ~34" long 2. 4x4 1/4" thick ~ 3 feet 3. 2 5x1/4 ~ 30" long 4. 1 4x1/4 ~30" long

1995 Ford Bronco - 94 Balljoint F-350 Dana 60 solid front axle

1995 Ford Bronco - Cleaned up frame horn for mock up

1995 Ford Bronco - Close-up of a damaged, rusted metal frame piece lying on the ground.

1995 Ford Bronco - The start of welding to box the frame horns

1995 Ford Bronco - A custom metal bracket is placed on a vehicle's seat, with a red object visible underneath.

1995 Ford Bronco - A metal part, likely a bracket or reinforcement, is shown after being welded. Gloves are placed underneath.

1995 Ford Bronco - Just took the bumper off. Need to cut the bumper mounts and sway bar mounts off. Then take and inch or so off of the body mounts

1995 Ford Bronco - Pass. side box finished. Notice the body mount cut ~ 1" and the notch cut out of my box

1995 Ford Bronco - Pass. side done

1995 Ford Bronco - Driver side done

1995 Ford Bronco - Custom metal fabrication is visible on the vehicle's frame, near the front suspension components.

1995 Ford Bronco - After ProComp 6" lift rear leaf springs

1995 Ford Bronco - 2x4 welded onto the inside of the boxes

1995 Ford Bronco - A fabricated metal frame component rests on a wooden surface, accompanied by an ashtray filled with cigarette butts.

1995 Ford Bronco - Metal fabrication parts, including a U-shaped bracket and a long bar, are laid out on a wooden table with two spray bottles and tools nearb…

1995 Ford Bronco - Sky Manufacturing shackles

1995 Ford Bronco - James Duff 15" long travel shocks

1995 Ford Bronco - Stock OBS Ford stamped steel shock mounts

1995 Ford Bronco - Sky Manufacturing shackles and hangers

1995 Ford Bronco - Hanger orientation

1995 Ford Bronco - Crossmember mocked up on frame

1995 Ford Bronco - Pass side front hanger welded on. They may seem very long but i left plenty of room to dial in my caster

1995 Ford Bronco - Custom welded steel tubing assembly, likely a custom part or bracket.

1995 Ford Bronco - Grade 8s, washers and lock washer to bolt the crossmember to the frame horns

1995 Ford Bronco - Front hangers ready to weld to the crossmember

Browse all 414 photos

The peanut gallery

No comments yet — be the first to add to the record.

Spotted in the wild

Seen this vehicle at a show or on the trail? Add your shot — the owner approves it onto the record.