SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Home/ Registry/ Ford/ Excursion/ 2000–2005/ “The Excursion”/ Alpine CDA-9827 Install supermotors.net/registry/9/19533

Album section

Alpine CDA-9827 Install

From 2000 Ford Excursion “The Excursion” — documented by E. Long.

32 photos
2000 Ford Excursion - The dashboard before removal. 2000 Ford Excursion - Old install of CVA-1005. 2000 Ford Excursion - CVA-1005 with screen closed. 2000 Ford Excursion - Pulling front dash panel off. 2000 Ford Excursion - Removing dash panel (transmission shifter must be down in 1st gear to remove this panel completely). 2000 Ford Excursion - Removing the 4x4, defrost, and parking sensor plugs. Note: Blue plug is for the parking sensor, the brown/orange plug is for the defrost. 4… 2000 Ford Excursion - 2 more plugs need to be removed from the headlight controls before removing the dash panel. 2000 Ford Excursion - Close-up of the headline plugs after removal. 2000 Ford Excursion - Dash panel removed. I have an LED wired into the front dash panel without quick disconnects which makes the dash panel hard to place anywhe… 2000 Ford Excursion - Another angle with the dash panel removed. 2000 Ford Excursion - Bracket (or lack thereof) holding the CVA-1005 in place. 2000 Ford Excursion - Removing the CVA-1005. 2000 Ford Excursion - Getting ready to remove lower dash panel - close-up of 1 of the screws. 2000 Ford Excursion - Must remove the cupholder (2 screws) before removing the lower dash panel. 2000 Ford Excursion - Cupholder removed. 2000 Ford Excursion - There are two lower screws that hold in the bottom dash panel that need to be removed as well. 2000 Ford Excursion - 2 screws to remove the strange hook/hanger thingy. 2000 Ford Excursion - Lower dash panel removed (don't forget to unplug the cigarette lighter before full removal). 2000 Ford Excursion - Antenna cable needed for AM/FM on the new deck. 2000 Ford Excursion - The CVA-1005 brain and its numerous wires. 2000 Ford Excursion - Splicing the yellow, red, and black wires together. 2000 Ford Excursion - Removing the CVA-1005. 2000 Ford Excursion - Rear view of the CDA-9827. 2000 Ford Excursion - CDA-9827 ready for install. 2000 Ford Excursion - CVA-1005 and CDA-9827 being pushed into place. 2000 Ford Excursion - Locating the mounting holes. 2000 Ford Excursion - Securing the CDA-9827 and CVA-1005 together. 2000 Ford Excursion - Securing the units into place to the dash. 2000 Ford Excursion - Installed w/o dash. 2000 Ford Excursion - Installed w/ dash. 2000 Ford Excursion - Night shot w/ CVA-1005 closed. 2000 Ford Excursion - Night shot w/ CVA-1005 open.